Need Help? Write Us or Call 800-877-7033
Welcome to Europa Parts!

034Motorsport Adjustable Upper Control Arm Kit (B5/B6/B7/C5)

034Motorsport Adjustable Upper Control Arm Kit (B5/B6/B7/C5)
034Motorsport Adjustable Upper Control Arm Kit (B5/B6/B7/C5)
$460.00

Availability: In Stock

MPN: 034-401-1000
By 034Motorsport

We are proud to offer the 034Motorsport's fully adjustable upper control arms for the B5/B6/B7 and C5 chassis cars! These arms are perfect for those who have lowered their car from factory ride height and as a result have excessive camber, which causes accelerated tire wear on the street.

Features:

  • CNC Machined Billet 6061 Construction, Black Anodized Finish
  • 034Motorsport Density Line Inner Bushings
  • Aurora Spherical Bearings Featuring Teflon Race Lining
  • Built in Safety Washer - Eliminates any chance of the spherical ever separating
  • Arm sets ship set to stock length
  • Over 5/8" of outward adjustability, and adjustable in 1/36" increments. Each 1/36" adjustment is approximately .1 degree, allowing for highly accurate adjustments
  • Rod end design eliminates tightening creep which is inherent with turnbuckle-style arms
  • Adjustments can be easily made by threading out an M6 head allen bolt. The pinch pin stays installed in the upright. A jam nut keeps everything tight once adjusted
  • Dust boots are now included with all adjustable upper control arms. We ship the boots uninstalled; once you have the alignment set, install the dust boots before final installation
  • Arms ship with everything pictured and assembled, price for one kit for one front suspension

Note: Do not run the heims with less than 8 threads in the control arm itself, less threads can cause failure of the part and 034Motorsport or Europa Parts will not be responsible for installation errors. If your alignment requires that you must have less than 8 threads engaged then contact us, but do not drive the car with less than 8 threads engaged! Tighten M10 pan head allen bolt to 45 ft/lbs with blue loctite.

Also, for vehicles with aluminum uprights, there must be a minimum of six threads visible between the heim joint lock nut and the outside end of the threads when the lock nut is fully tightened. Threading the heim joint into the arm with less than six threads visible between the lock nut and heim joint body may cause contact between the heim joint lock nut and the suspension upright, causing damage and potential failure. Tighten M10 pan head allen bolt to 45 ft/lbs with blue loctite.

Control arms do not have to be removed to adjust camber. Please see this video highlighting the ease of adjustment. Installation Instructions for dust boots.

OR
Product Specifications

Additional Information

SKU 004084
Manufacturer PN 034-401-1000
Manufacturer 034Motorsport
Category Steering, Suspension
Subcategory Control Arm Kits
Application Guide
  • Audi A4 B5 1.8T
  • Audi A4 B5 2.8L V6 12v
  • Audi A4 B5 2.8L V6 30v
  • Audi A4 B6 1.8T
  • Audi A4 B6 3.0L V6
  • Audi A4 B7 2.0T
  • Audi A4 B7 3.2L V6
  • Audi A6 allroad 2.7T
  • Audi A6 allroad 4.2L V8
  • Audi A6 C5 2.7T
  • Audi A6 C5 2.8L V6
  • Audi A6 C5 3.0L V6
  • Audi A6 C5 4.2L V8
  • Audi RS4 B5
  • Audi RS4 B7
  • Audi RS6 C5
  • Audi S4 B5
  • Audi S4 B6
  • Audi S4 B7
  • Audi S6 C5
  • VW Passat B5 1.8T
  • VW Passat B5 TDI
  • VW Passat B5 V6
  • VW Passat B5 W8
Reviews

You may also be interested in the following product(s)